文章目錄回顧Reactor_v1實現Socket類實現頭文件源文件InetAddr類的實現頭文件源文件Acceptor類的實現頭文件源文件SocketIO類的實現頭文件源文件TcpConnection類的實現頭文件源文件回顧先回顧一下我們整個的實現框架所以第一步應該是實現的是——封裝系統調用另外為了方便打印調試信息可以把日志系統用單例模式先實現出來。關于用單例模式實現日志系統我們在之前的文章中已經實現過了這里就不過多贅述了。詳情可以跳轉到該文章中查看Reactor網絡模型本質上就是使用epoll的并發網絡模型通過連接器連接到服務器網絡然后注冊三個事件(對應epoll的三個接口函數)通過事件驅動(事件循環和事件分發)來響應客戶端的請求。Reactor_v1實現在寫代碼之前要整理一下思緒框架圖中已經很明確的寫出了有哪些類我們在第一個版本的內容中實際上就是對系統調用的封裝下面就畫一個類圖整理一下具體實現的內容。Acceptor類中可以將地址復用、端口復用、bind、listen這些寫法固定的流程封裝在一個ready函數中。關于其它類行該可以比較容易的理清思路。需要著重考慮的是IO操作因為使用send/recv或write/read一次處理的字符數量是由上限的。所以我們應該設置一個合適大小的緩沖用來接收數據流。Socket類實現頭文件/** * 封裝文件描述符 */#ifndef_SOCKET_H#define_SOCKET_H#includesys/types.h#includesys/socket.hclassSocket{public:Socket();/** * param fd * 禁止隱式轉換防止出現問題 */explicitSocket(intfd);~Socket();intgetFd();private:int_fd;};#endif//_SOCKET_H源文件/** * 封裝文件描述符 */#includeSocket.h#includestdio.h#includestdlib.h/** * Socket implementation */Socket::Socket(){_fd::socket(AF_INET,SOCK_STREAM,0);if(_fd-1){perror(socket error);exit(EXIT_FAILURE);}}/** * param fd */Socket::Socket(intfd):_fd(fd){}Socket::~Socket(){}/** * return int */intSocket::getFd(){return_fd;}InetAddr類的實現頭文件/** * 地址相關操作 */#ifndef_INETADDRESS_H#define_INETADDRESS_H#includestring#includenetinet/in.h#includenetinet/ip.h#includesys/socket.h#includearpa/inet.husingstd::string;classInetAddress{public:/** * param ip * param port */InetAddress(conststringip,unsignedshortport);/** * param addr */InetAddress(conststructsockaddr_inaddr);~InetAddress();stringgetIp();unsignedshortgetPort();conststructsockaddr_in*getInetAddressPtr();private:structsockaddr_in_addr;};#endif//_INETADDRESS_H源文件/** * 地址相關操作 */#includeInetAddress.h/** * InetAddress implementation *//** * param ip * param port */InetAddress::InetAddress(conststringip,unsignedshortport){_addr.sin_familyAF_INET;_addr.sin_porthtons(port);_addr.sin_addr.s_addr::inet_addr(ip.c_str());}/** * param addr */InetAddress::InetAddress(conststructsockaddr_inaddr):_addr(addr){}InetAddress::~InetAddress(){}/** * return string */stringInetAddress::getIp(){string temp::inet_ntoa(_addr.sin_addr);returntemp;}/** * return unsigned short */unsignedshortInetAddress::getPort(){return::ntohs(_addr.sin_port);}/** * return const struct sockaddr_in * */conststructsockaddr_in*InetAddress::getInetAddressPtr(){return_addr;}Acceptor類的實現頭文件/** * 連接器的實現 */#ifndef_ACCEPTOR_H#define_ACCEPTOR_H#includeInetAddress.h#includeSocket.husingstd::string;classAcceptor{public:/** * param ip * param port */Acceptor(conststringip,unsignedshortport);~Acceptor();voidready();intaccept();private:Socket _sock;InetAddress _addr;voidsetReuseAddr();voidsetReusePort();voidbind();voidlisten();};#endif//_ACCEPTOR_H源文件/** * 連接器的實現 */#includeAcceptor.h/** * Acceptor implementation *//** * param ip * param port */Acceptor::Acceptor(conststringip,unsignedshortport):_sock(),_addr(ip,port){}Acceptor::~Acceptor(){}/** * return void */voidAcceptor::ready(){setReuseAddr();setReusePort();bind();listen();return;}/** * return int */intAcceptor::accept(){intclientfd::accept(_sock.getFd(),NULL,NULL);if(clientfd-1){perror(accept error);return-1;}returnclientfd;}/** * return void */voidAcceptor::setReuseAddr(){intopt1;if(::setsockopt(_sock.getFd(),SOL_SOCKET,SO_REUSEADDR,opt,sizeof(opt))-1){perror(reuse sockaddr error);exit(EXIT_FAILURE);}return;}/** * return void */voidAcceptor::setReusePort(){intopt1;if(::setsockopt(_sock.getFd(),SOL_SOCKET,SO_REUSEPORT,opt,sizeof(opt))-1){perror(reuse port error);exit(EXIT_FAILURE);}return;}/** * return void */voidAcceptor::bind(){if(::bind(_sock.getFd(),(structsockaddr*)_addr.getInetAddressPtr(),sizeof(structsockaddr))-1){perror(bind error);exit(EXIT_FAILURE);}return;}/** * return void */voidAcceptor::listen(){if(::listen(_sock.getFd(),100)-1){perror(listen error);exit(EXIT_FAILURE);}return;}SocketIO類的實現頭文件/** * IO操作 */#ifndef_SOCKETIO_H#define_SOCKETIO_H#includeunistd.h#includeerrno.h#includestdlib.h#includestdio.h#includesys/socket.h#includesys/types.hclassSocketIO{public:/** * param fd */explicitSocketIO(intfd);~SocketIO();/** * param buf * param len */intreadn(char*buf,intlen);/** * param buf * param len */intreadLine(char*buf,intlen);/** * param buf * param len */intwriten(constchar*buf,intlen);private:int_fd;};#endif//_SOCKETIO_H源文件/** * IO操作 */#includeSocketIO.h/** * SocketIO implementation *//** * param fd */SocketIO::SocketIO(intfd):_fd(fd){}SocketIO::~SocketIO(){if(_fd!-1){close(_fd);_fd-1;}}/** * param buf * param len * return int */intSocketIO::readn(char*buf,intlen){intremainlen;// 剩余沒讀的字節intret0;char*pstrbuf;while(remain0){ret::read(_fd,pstr,sizeof(remain));if(ret-1errnoEINTR){::perror(read error);return-1;}elseif(ret0){break;}else{pstrret;remain-ret;}}returnlen-remain;}/** * param buf * param len * return int */intSocketIO::readLine(char*buf,intlen){intremainlen-1;intret0,total0;char*pstrbuf;while(remain0){ret::recv(_fd,pstr,remain,MSG_PEEK);if(ret-1errnoEINTR){::perror(readLine error);return-1;}elseif(ret0){break;}else{for(inti0;iret;i){if(pstr[i]\n){intszi1;readn(pstr,sz);pstrsz;*pstr\0;returnsztotal;}}readn(pstr,ret);totalret;pstrret;remain-ret;}}*pstr\0;returntotal;}/** * param buf * param len * return int */intSocketIO::writen(constchar*buf,intlen){intremainlen;constchar*pstrbuf;intret0;while(remain0){retwrite(_fd,pstr,remain);if(ret-1errnoEINTR){::perror(writen error);return-1;}elseif(ret0){break;}else{pstrret;remain-ret;}}returnlen-remain;}TcpConnection類的實現頭文件/** * 連接管理 */#ifndef_TCPCONNECTION_H#define_TCPCONNECTION_H#includestring#includeSocketIO.husingstd::string;classTcpConnection{public:/** * param fd */explicitTcpConnection(intfd);~TcpConnection();stringreceive();/** * param msg */voidsend(conststringmsg);private:SocketIO _sockIO;};#endif//_TCPCONNECTION_H源文件/** * 連接管理 */#includeTcpConnection.h/** * TcpConnection implementation *//** * param fd */TcpConnection::TcpConnection(intfd):_sockIO(fd){}TcpConnection::~TcpConnection(){}/** * return string */stringTcpConnection::receive(){charbuffer[1024]{0};_sockIO.readLine(buffer,sizeof(buffer));returnstring(buffer);}/** * param msg * return void */voidTcpConnection::send(conststringmsg){_sockIO.writen(msg.c_str(),msg.size());return;}以上就是Reactor的全部函數完成了對系統調用的封裝。下面再寫一個測試文件#includeAcceptor.h#includeTcpConnection.h#includeiostreamusingstd::cout;usingstd::endl;voidtest0(){Acceptoracceptor(0.0.0.0,8080);acceptor.ready();TcpConnectioncon(acceptor.accept());while(1){/* cout recv msg from client: con.receive() endl; *//* con.send(hello,world\n); */string msgcon.receive();coutrecv msg from client: msgendl;con.send(msg:msg);}}intmain(){test0();return0;}下面再開一個終端自測一下基本上還是符合我們預期的也就是說明我們對于底層的封裝沒有了太大問題。我們的Reactor第一代基本完成了當然可以把之前封裝的log4cpp的代碼替代perror()。下面的工作就是完成核心層事件驅動的代碼就是對epoll的封裝另外TcpConnection是用來管理連接的所以當我們使用服務器采用事件驅動的形式時TcpConnection中的數據成員和成員函數也要隨之變動。